TOP
PLASTIC PAINT
TOP PLASTIC PLASTIC is a white paint prepared by an emulsion, type “polymer (PVA-VEOVA) in water” destined for painting interior walls, which besides resins and water, contains certain percentages of fillers, pigments and other layers such as titanium dioxides, calcium carbonate, sodium hexametaphosphate, hidroxietilcelulose, isotiasolinon,
polixiloxane, ammonium sweater, potassium hydroxide, which improve the properties of paint.
PACKAGING
0.75L / 3L / 9L / 15L
DRYING TIME
3-4 Hours
CONSUMPTION
4-5 m2/L
- Information
- Technical Data
DESCRIPTION: TOP PLASTIC PLASTIC is a white paint prepared by an emulsion, type “polymer (PVA-VEOVA) in water” destined for painting interior walls, which besides resins and water, contains certain percentages of fillers, pigments and other layers such as titanium dioxides, calcium carbonate, sodium hexametaphosphate, hidroxietilcelulose, isotiasolinon, polixiloxane, ammonium sweater, potassium hydroxide, which improve the properties of paint. Referring to its components, in optimal conditions, the paint dries 3-4 hours after its application, creating a plastic layer, highly resistant to rubbing and with high sustainability to water and light. Two weeks after painting, the surface can be washed with a wet rag.
AREAS OF USAGE: TOP PLASTIC PAINT can be used in interior surroundings, to paint plastered surfaces or concrete surfaces.
PREPARATION: The surface which will be painted, should be clear of all powder dusts, fats or previous paint layers, connected weakly to the surfaces (swollen layers). In new surfaces, you have to use in advance plastic liner PN-301, which can be diluted in water in the ratio of 30% or plastic liner PN-101 which is ready for usage.
USAGE: The paint is prepared by adding water to the wanted consistency. To achieve a good result, you must apply two coats of TOP PLASTIC PAINT in advance. In the first coats, the paint dilution with water should be in the ratio of 15-20%. In the second coat, which is applied after the first coat is fully dried, the water dilution should be done up to 10% of ratio. The pigment doses that can be used, are recommended by the manufacturer. The painting can be easily applied with rollers or brushes.
WARNING: The application of the liner in wet surfaces and in conditions of high humidity, IS NOT ALLOWED. It is also not advisable to use it under 5°C. After painting, the tools must be immediately washed with water and soap.